Water Saving Tips

Conserving Water Is Easy

Water-efficient technologies and products consume less water while having little or no impact on your lifestyle. Not only is saving water the right thing to do, it can also save you money.  Saving water may also lower your sewer and energy bills.

Water
Saving
Tips

Water Meters

Use Your Water Meter To Find Leaks

Your water meter is an important conservation tool. It not only measures the amount of water you use, but can also tell you if there is a leak in your plumbing.

1. Locate Your Water Meter

Your water meter is generally located near the curb in front of your home in a concrete box usually marked “water” or in a meter pit with a cast iron lid. Carefully remove the lid by using a tool such as a large screwdriver or pliers. Visually examine the area around the meter to make sure there are no harmful insects or other animals.

water meter

2. Read Your Water Meter

Water meters measure volume in gallons or cubic feet. One cubic foot = 7.48 gallons and 100 cubic feet = 748 gallons. Water charges are typically based on 100 cubic feet or on 1,000 gallon units. In the meter shown the reading is taken from the figures shown under the words cubic feet. The meter reads 81710.03 which is the total number of cubic feet of water recorded since the meter was installed. If the utility bills in units of 100 cubic feet they would read this meter as simply 817.

3. Test For Leaks Using Your Water Meter

  • Take a reading and wait 10 minutes.  Be sure to stop all water use inside and outside the home, including ice makers. When the 10 minutes are up, take another reading of the meter and compare it to the first reading.  If the reading has changed, there is a leak.
  • Water meters also have a low flow indicator. This is usually a small, triangle or wheel that spins when water is flowing through the meter.  Look for movement on the low flow indicator while all water used has been stopped.  If there is movement, water is still flowing through indicating a leak.
  • If the water meter has a digital display, a message indicating a leak will flash.
Indoors

Indoor Water Conservation Tips

1

Appliance Types And Usage

2

Don’t Let Water Run

  1. Don’t let water run while shaving, brushing teeth or rinsing dishes.
  2. When you are washing your hands, don’t let the water run while you lather.
3

Check & Fix Leaks

  1. Listen for dripping faucets and toilets that flush themselves. Fixing a leak can potentially save hundreds of gallons each month.
  2. Check your toilet for leaks
  3. Read your water meter to assess usage and find hidden leaks.

Learn How

How To Check Your Toilet For Leaks

toilet tank with dye
  1. Remove the tank lid.  Carefully remove the tank lid and lay it flat on the floor to prevent it from falling over and breaking.  Condensation on the underside of the tank lid may drip as you are removing the lid.
  2. Check the water level in the tank.  If the water level is above the manufacturers indicated water line, make adjustments to correct the water level.  If adjustments were made, reset the toilet by flushing it and allowing the tank to refill and stop on its own.
  3. Drop a dye tablet (available from your water provider) or several drops of food dye into the tank. Do NOT flush.  Wait 15 minutes.  If you have more than one toilet to test, repeat Steps 1 through 3 for each toilet while you wait.
  4. Check the water in the bowl for color.  If the color appears in the bowl, there is a leak.  Replacing the toilet’s flapper valve will likely stop the leak.  To ensure proper flush performance, be sure the replacement flapper meets the toilet manufacturers specifications for your toilet model.
Outdoors

Outdoor Water Conservation Tips

1

Convert Your Lawn To A Garden

Lawn isn’t native to our area and uses a lot of water.  Sheet mulching is a simple technique for converting lawn to a low water use garden and nurturing the soil.

2

Watering Schedule

Water between midnight and 6:00 a.m. to reduce water loss from evaporation and wind. Water your lawn and garden in 2 short cycles rather than one long one. Watering to a depth of 4 to 6” will encourage deeper healthier roots and allow the plants to go without water for longer periods of time.

3

Irrigate By Hand

Target your water use by hand watering exactly in the spots that need it.

Many plants go dormant—stop growing—in the winter and therefore need less water. Your irrigation system should already be turned off for the winter. Use a hose to hand water plants as needed. Be sure that the hose has a self-closing hose nozzle. While the flow rate for a hose is dependent on many factors such as hose diameter and water pressure, a typical garden hose without self-closing hose nozzle will flow at 10 to 16 gallons per minute. If you have a lawn, participate in a local “cash for grass” rebate program available in some areas of the region and get rebate for replacing it with low water-use plants.

If you must use an irrigation system:

  • Use drip irrigation rather than sprinklers.
  • Inspect and tune-up your sprinkler system monthly.
  • Manually activate watering when and where water is needed.
  • Adjust your irrigation system to prevent water from running off your lawn, onto your sidewalks and down the gutter.
4

Cleaning Walkways

Use a broom, not a hose, to clean your driveway, deck or patio. Washing a sidewalk or driveway with a hose uses about 50 gallons of water every 5 minutes.

5

Washing Vehicles

Use a bucket and a hose with an automatic shut-off nozzle when you wash the car, or take your car to a carwash that recycles. Save water by extending the time between car washes or take your car to a Sonoma Green Car Wash.

6

Pool Covers

Cover pools and hot-tubs to reduce evaporation.